6
FUNCTIONS
6.6 Remote Operation
6.6.4 Remote latch clear
6 - 35
1
Overview
2
Performance
Specification
3
Sequence Program
Configuration and
Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files
Handled by CPU Module
6
Functions
7
Communication using
built-in Ethernet ports of
CPU module
8
Communication with
Intelligent Function
Module
(c) Devices that are reset at execution of remote latch clear
Devices that are not latched are cleared when the remote latch clear is performed.
(d) When redundant system is configured using Redundant CPU
1) When both systems are not specified on remote operation screen
Remote latch clear is performed for only the system specified in the
connection target settings.
2) When both systems are specified on remote operation screen
Remote latch clear is performed for both the control system and standby
system.
However, remote operation is enabled for both systems (specified) only when
the Redundant CPU is in the backup mode.
To Next Page
Loading...
Need help?
General
