To Next Page

To Previous Page

6 - 40

6.8 Error Time Output Mode Setting

FUNCTIONS

6.8 Error Time Output Mode Setting

(1) Error time Output Mode Setting

The error time output mode setting is to set whether the output to the Q series

corresponding output module, I/O combined module, intelligent function module or

interrupt module will be cleared or held when the CPU module results in a stop error.

(2) Error time Output Mode Setting

Make the error time output mode setting in the I/O assignment setting of the PLC

parameter dialog box.

1) Make I/O assignment.

2) Select the button.

3) Choose "Clear" or "Hold" for the slot to which the error time output mode is set.

(The default is "Clear".)

(3) Precautions

The error time output mode setting is made valid when:

• When the PLC is powered OFF and then ON

• When the CPU module's RESET switch is set to neutral position

Failure to perform either operation after changing the error time output mode setting

will result in "PARAMETER ERROR (error code: 3000)".

Figure 6.24 Error time output mode setting sequence

Detailed setting

3) Error time output mode

Select "Clear" or "Hold".

1) Make I/O assignment. 2) Select Detailed setting.

Mitsubishi Q02HCPU User Manual

Other manuals for Mitsubishi Q02HCPU