8 - 1 8 - 1
MELSEC-Q
8 UTILITY PACKAGE (GX Configurator-MB)
8 UTILITY PACKAGE (GX Configurator-MB)
GX Configurator-MB is a tool designed to support sequence program creation
necessary for the parameter setting, auto refresh, and monitor/test of the QJ71MT91.
8.1 Functions of the Utility Package
The following table lists the GX Configurator-MB functions.
Item Description Reference section
Initial setting
(1) The following items that require initial setting.
Basic parameters
Automatic communication parameters
MODBUS
R
device assignment parameters
(2) The initially set data are registered to the CPU module parameters, and
automatically written to the QJ71MT91 when the CPU module enters
the RUN status.
Section 8.4
Auto refresh setting
(1) The QJ71MT91’s buffer memory is configured for automatic refresh.
Automatic communication function buffer input area
Automatic communication function buffer output area
Automatic communication operation status storage area
User free area
(2) The data of the QJ71MT91 buffer memory areas set for auto refresh are
automatically read from/written to the specified devices when the END
instruction of the CPU module is executed.
Section 8.5
Monitor/test
(1) Monitor/test
The buffer memory and I/O signals of the QJ71MT91 are monitored or
tested.
Various setting status, module status
X/Y Monitor/test
Basic/MODBUS
R
device assignment parameter status
Automatic communication status
Error log
Communication status
PING test
Section 8.6
8
To Next Page
Loading...
Need help?
General
