44 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
ENGLISH
CYLINDER HEAD AND VALVE
MECHANISM
DISASSEMBLY
44 / 195
t
14.1 Rocker shaft assembly
removal
1. Remove the bolts that hold the rocker stays in
position and remove the rocker shaft assembly.
2. Remove the valve caps.
t
14.2 Rocker shaft disassembly
Put identification on each rocker arm as to its location
on the rocker shaft.
t
14.3 Cylinder head bolt removal
Loosen the cylinder head bolts in two or three steps in
the sequence shown.
Figure 31 Removing rocker shaft assemblies
Figure 32 Disassembling rocker shaft assembly
Figure 33 Cylinder head bolt loosening sequence
Front
NOTE
If any parts on the cylinder head are faulty, check the
cylinder head bolts for tightness with a torque wrench
before loosening them.
To Next Page
Loading...
Need help?
General
