48 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
ENGLISH
Timing Gears and Flywheel DISASSEMBLY
48 / 195
t
15.3 Oil seal case removal
Remove the bolts that hold the oil seal case in position.
Remove the case from the cylinder block with a
screwdriver or the like.
t
15.4 Tappet removal
Remove the tappets from the cylinder block with a
valve push rod.
t
15.5 Speedometer driven gear
removal
Remove the lock plate and speedometer driven gear in
that order.
Figure 40 Removing oil seal case
îîCAUTION
Do not cause damage to the oil seal.
Figure 41 Removing tappets
NOTE
The valves, retainers, springs and valve locks must
be set aside separately in groups, each tagged for
cylinder number, for correct installation.
Figure 42 Removing speedometer driven gear
NOTE
Unless the speedometer driven gear is removed, the
camshaft cannot be removed.
To Next Page
Loading...
Need help?
General
