Mitutoyo Measuring Projector User Manual

3. Operation
3.3.2 Positioning the workpiece
When the image is in focus on the screen, align the measured edge of the workpiece to
the measuring axis of the cross-travel stage. Move the workpiece or the fixture so as to
align the workpiece image with the cross-hair lines on the screen.
• Rotary table (No.176-106, 172-196) is suitable for performing alignment.
No.99MBA043A 3 - 5

Mitutoyo Measuring Projector Specifications

General

Brand	Mitutoyo
Model	Measuring Projector
Category	Projector
Language	English