Turning Bluetooth Visibility Off
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn
Bluetooth visibility off. The result of all the methods is
the same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Turn Bluetooth visibility off via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or to Visibility and press the Menu
Select button directly below Off.
The display shows Visibility Off.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn Bluetooth visibility off.
c) To return to the Home screen, press the Menu
Select button directly below Exit.
• To disable the Bluetooth visibility, press the
preprogrammed button.
You hear a short, medium-pitched tone. The
display shows momentary Visibility Off.
Visibility mode is disabled.
When the timer expires, the status changes to
Visibility off failed. Repeat this step to
turn Bluetooth visibility off.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN
feature is designed to enable your radio to verify the
correct device to pair before initiating the pairing.
Authentic PIN is used for the verification.
Note: The compare PIN authentication method is only
applicable for Bluetooth version 2.1 and above.
Pairing the Authentication PIN when Receiving a
Pairing Request
1
When the radio display shows <Device Friendly
Name> pair request, perform one of the
following actions:
• To accept, press the Menu Select button
below Ok.
• To reject, press the Menu Select button below
Cncl
To Next Page
Loading...
Need help?
General
