Motorola APX 4000 User Manual

5 To return to the Home screen, press the Menu
Select button directly below Exit.
The SSA Alert for the designated site stops.
Stopping SSA Notification of a Single Site Via Manual
Entry
1
or to SSA.
2
Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to Stop Alert and press the Menu
Select button directly below Sel.
The display shows the Select Site screen.
4
or to [SiteID Entry] and press the
Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu
Select button directly below Send.
One of the following scenarios occur:
• If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID
again.
• If a correct Site ID is entered, the display
shows Sending req.
• If the request is successful, the display shows
Req successful.
• If the single site is not available, the display
shows <Site ID> not available.
• If the single site does not exist, the display
shows <Site ID> does not exist.
6 To return to the Home screen, press the Menu
Select button directly below Exit.
The SSA Alert for the designated site stops.
Stopping SSA Notification of All Sites
1
or to SSA.
2
Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to Stop Alert and press the Menu
Select button directly below Sel.
The display shows the Select Site screen.
4
or to [All Sites] and press the Menu
Select button directly below Send.
Advanced Features
162
English

Motorola APX 4000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Frequency Range	VHF: 136-174 MHz, UHF: 380-470 MHz, 450-520 MHz
Power Output	VHF: 1-5W; UHF: 1-4W
Digital Protocol	APCO P25
Dimensions	5.2 x 2.4 x 1.5 inches (without battery)