• Emergency Call (Incoming Only)
Note: The radio can also be preprogrammed to log
only the radio IDs associated with incoming Dispatch
Calls. Check with your dealer or system administrator
for more information.
The following methods are options on how to view
recent calls. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
• Viewing recent calls via the preprogrammed
Recent Calls button:
a) Press the preprogrammed Recent Calls
button.
b) or to scroll through the list.
c) To return to the Home screen, press the Menu
Select button directly below Exit, press or
the PTT button.
• Viewing recent calls via the radio menu:
a)
or to Rcnt.
b) Press the Menu Select button directly below
Rcnt to access the Recent Calls feature
screen.
c) or to scroll through the list.
d) To return to the Home screen, press the Menu
Select button directly below Exit, or the
PTT button.
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Selecting the Power Level
Note: This feature must be preprogrammed by a
qualified radio technician.
This feature enables you to reduce the transmit
power level for specific case that requires a lower
power level. You can select the power level at which
your radio transmits. The radio always turns on to the
default setting. These reduced transmit power level
settings do not affect the receiving performance of
your radio, nor diminish the overall quality of the
audio and data functionality of the radio given the
following conditions.
Power levelLow enables a shorter transmitting
distance and to conserve power. Power levelHigh
enables a longer transmitting distance.
To Next Page
Loading...
Need help?
General
