Motorola APX 4000 User Manual

If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req
successful.
If the site is not available, the display shows <Site
Alias> not available.
If the site does not exist, the display shows <Site
Alias> does not exist.
6 To return to the Home screen, press the Menu
Select button directly below Exit.
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the <Alert Alias> with the intelligent
lighting at Home screen.
Sending SSA Notification to Single Site Via Manual
Entry
1
or to SSA.
2
Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to Start Alert and press the Menu
Select button directly below Sel.
The display shows the Select Site screen.
4
or to [SiteID Entry] to send alert via
manual entry. Press the Menu Select button
directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the desired Site ID and press the Menu
Select button directly below Ok.
If a correct Site ID is entered, the display shows
the Select Alert screen.
If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID
again.
6 or to select the desired Alert Alias and
press the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req
successful.
Advanced Features
159
English

Motorola APX 4000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Frequency Range	VHF: 136-174 MHz, UHF: 380-470 MHz, 450-520 MHz
Power Output	VHF: 1-5W; UHF: 1-4W
Digital Protocol	APCO P25
Dimensions	5.2 x 2.4 x 1.5 inches (without battery)