You can cancel this operation at this step by
pressing the Menu Select button directly below
Cncl to return to Search Options screen.
The display shows Searching.... Once found,
the display shows Channel updated.
If the radio is triggered to search for an empty
entry, the display shows Invalid entry.
If the entry does not match, the display shows
Channel name not found. Repeat from step 4 or
5 to search again.
6
Press to return to the Home screen.
Deleting a Channel in the Dynamic Zone
The radio must be in Dynamic Zone in order to
perform this operation.
1
or to ZnPr then press the Menu Select button
directly below ZnPr to enter Program Zone
screen.
The display shows the dynamic channels list.
2 or to the saved dynamic channel then
press the Menu Select button directly below Del.
The display shows Channel deleted screen.
3
Press the Menu Select button below Exit to
return to Home screen.
The Home screen shows <Dynamic Zone
Channels>.
If the channel deleted is the Home channel, the
Home screen shows <Zone Name>+”Blank”.
Contacts
This feature provides “address-book” capabilities on
your radio. Each entry corresponds to an alias (name)
or ID (number) that you use to initiate a call.
Contact entries are alphabetically sorted according to
entry alias. Each alias can have up to five IDs of
different call types associated with it.
Additionally, each entry, depending on context
(conventional, trunking, or phone), associates with
one or more of the four types of calls: Phone Call,
Selective Call, Private Call, or Call Alert.
Each entry within Contacts contains the following
information:
• Call Alias (Name)
To Next Page
Loading...
Need help?
General
