Motorola MC3000 User Manual

Maintenance and Troubleshooting 5 - 7
UBC Adapter
Spare battery is not
charging.
Charger is not
receiving power.
Ensure the power cable is connected securely to both the charger
and to AC power.
Spare battery is not
correctly seated.
Remove and re-insert the battery into the charger, ensuring it is
correctly seated.
Spare battery was
removed from charger
or charger was
unplugged from AC
power too soon.
Ensure charger is receiving power. Ensure the spare battery is
seated correctly. If a battery is fully depleted, it can take up to four
hours to fully recharge a Standard Battery and it can take up to six
hours to fully recharge an Extended Life Battery.
Spare battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Table 5-5 Troubleshooting the Four Slot Spare Battery Charger (Continued)
Symptom Possible Cause Solution
Table 5-6 Troubleshooting the UBC Adapter
Symptom Possible Cause Solution
Battery Charging
LED does not light
when spare battery
is inserted.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charging slot,
ensuring it is correctly seated.
Battery not charging. Charger is not receiving
power.
Ensure the power cable is connected securely to both the charger
and to AC power.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charger, ensuring
it is correctly seated.
Spare battery was
removed from charger
or charger was
unplugged from AC
power too soon.
Ensure charger is receiving power. Ensure the spare battery is
seated correctly. If a battery is fully depleted, it can take up to four
hours to fully recharge a Standard Battery and it can take up to six
hours to fully recharge an Extended Life Battery.
Spare battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.

Motorola MC3000 Specifications

General

Brand	Motorola
Model	MC3000
Category	Telephone
Language	English