3 - 20 MC3000 User Guide
5. Tap the remote device folder.
6. Tap and hold on the remote device and select
Explore. A headset service item appears.
7. Tap and hold on the headset service name and select
Connect.
8. The mobile computer connects to the headset. Refer to your headset user manual for instruction on
communicating with a Bluetooth device.
To adjust the microphone gain:
1. Tap and hold on the headset service item and select
Adjust Microphone from the pop-up menu. The
Microphone Properties window appears.
2. Select the slider and adjust the gain.
3. Tap
OK.
Serial Port Services
Use the wireless Bluetooth serial port connection just as you would a physical serial cable connection. You must
configure the application that will use the connection to the correct serial port.
To establish a serial port connection:
1. Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-21.
2. Discover and bond (pair) with the remote device.See Bonding with Discovered Device(s) on page 3-9.
3. In
BTExplorer, select the Remote Devices folder.
4. Select the
Trusted Devices folder.
5. Tap the remote device folder.
6. Tap and hold
Serial Port and select Connect in the pop-up menu. The Remote Service Connection window
appears.
Figure 3-27 Remote Service Connection Window
7. In the
Local COM Port drop-down list select a COM port.
8. Tap
OK.
NOTE By default, COM ports COM4, COM5 and COM9 are Bluetooth virtual ports. If an application opens one of
these ports, the Bluetooth driver activates and guides you through a Bluetooth connection.
To Next Page
Loading...
Need help?
General