Getting Started 1 - 11
Waking the Mobile Computer
The wakeup condition settings are used to define what actions wake up the mobile computer. The settings are
configurable so they are subject to change/update. For more information see, Waking the Mobile Computer on
page 2-35.
Main Battery Removal
Before removing the main battery, turn off the mobile computer.
To remove the main battery:
1. Rotate the latches to the open position.
2. Lift the Hand Strap to lift the Strap/Door Assembly off, bottom first.
3. Release battery:
a. On the MC3000S/R, release the battery clip (at the top of the battery) and lift the battery out top first.
b. On the MC3090G, pull the battery pull tab to unclip the battery and lift the battery out top first. If the battery
does not have a pull tab, use the stylus to unclip the battery and then lift the battery.
Figure 1-10
Main Battery Removal (MC3000S/R)
CAUTION Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
CAUTION On the MC3090G battery, do not remove the battery pull tab. The pull tab is for enabling easy battery
removal from the device.
Battery Clip
Latches
Strap/Door
Assembly
Battery
Hand Strap
To Next Page
Loading...
Need help?
General