Using Bluetooth 3 - 5
Modes
The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer Mode.
The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users.
Wizard Mode
Wizard Mode provides a simple step by step process for discovering and connecting to Bluetooth devices. The
wizard takes you through the entire process.
The following steps provide an example for using the Wizard to services for remote devices.
1. Tap the
Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.
2. Tap
File > New Connection. The New Connection Wizard window appears.
Figure 3-4 New Connection Wizard Window
3. Select an action from the drop-down list. In this example,
Explore Services on Remote Device is selected.
4. Tap
Next. The BTExplorer searches for Bluetooth devices in the area and displays the devices in the Select
Remote Device
window.
NOTE When switching between Wizard Mode and Explorer Mode, all active connections are closed.
To Next Page
Loading...
Need help?
General