▪ Faders: for recalibrating the TEMPO and channel faders.
▪ Crossfader: for recalibrating the crossfader on the Mixer.
▪ Jogwheel: for recalibrating the Jogwheels for channel A and B.
8.2.4 LEDs
The LEDs section provides you with two sliders that allow you to adjust the brightness for both
states of all LEDs on your S2:
▪ On State Brightness: Sets the brightness for the On state of the LEDs.
▪ Off State Brightness: Sets the brightness for the Off state of the LEDs.
8.3 Other Settings of Interest
This
section
describes a few other settings of the TRAKTOR Preferences that affect the way
your TRAKTOR KONTROL S2 reacts.
8.3.1 Switching the Deck Flavors
Switching Deck
Flavors is not advised for when using TRAKTOR in combination with the S2
controller. Decks A/B in Track Deck mode, and Decks C/D in Remix Deck mode is the only rea-
sonable setting for controlling TRAKTOR with the S2 controller.
As explained in section ↑6.1.1, Decks, you can control Decks C and D via your TRAK-
TOR KONTROL S2. However, Decks C and D have to be set to Remix Decks. To do this, go to
Preferences > Decks Layout > Deck Flavor.
The Deck Flavor section allows you to select another flavor for each of the lower Decks C and D.
In this section, each menu represents a Deck and is labeled accordingly.
Customizing TRAKTOR KONTROL S2
Settings and Preferences for the S2 Control Elements
Traktor Kontrol S2 - Manual - 141
To Next Page
Loading...
Need help?
General
