13 Appendix C – Quick References
This appendix provides
you with Quick Reference tables summing up the basic functionality of
each control element on your TRAKTOR KONTROL S2. This gives you a quick and concise
overview of all basic functions of your controller. For more info on each control element, please
refer to the descriptions in chapter ↑6, Hardware Overview.
13.1 Quick Reference
See chapter ↑7, Hardware Control Reference for more details on these control elements.
Control element Function
Remix Mode buttons A/B (be-
low REMIX knob)
Switches the CUE/REMIX SLOTS buttons to Remix Deck mode. Lit when
Remix Deck mode is enabled. See ↑7.5, Using the CUE/REMIX SLOTS Sec-
tion for more info on the CUE/REMIX SLOTS section modes.
Load buttons A/B (below
BROWSE encoder)
Normal: loads selected track on the respective Deck.
SHIFT: copies and pastes the content of the opposite Track Deck to the
Deck.
Lights up when you press the jog wheel’s top plate.
Jog wheel Outer rim: tempo bending.
Top plate: scratch control (direct control on playback position).
SHIFT + top plate: seek through track (fast forward / rewind).
In Loop: hold LOOP IN / LOOP OUT button and spin the jog wheel to fine-
tune the Loop In Point / Loop Out Point.
Tempo fader Increases/decreases Deck tempo.
Hold SHIFT to move the fader without altering the tempo.
FLUX buttons Engage TRAKTOR’S Flux mode when pressed.
Press SHIFT + FLUX to reset a Deck’s tempo.
Appendix C – Quick References
Quick Reference
Traktor Kontrol S2 - Manual - 169
To Next Page
Need help?
General
