Native Instruments TRAKTOR KONTROL S2 User Manual

Deactivating Looping
If you want to deactivate the current Loop, do the following:
►
To deactivate looping, push either of the LOOP MOVE or LOOP SIZE encoder.
→
The playback continues after the Loop.
By pushing the LOOP MOVE encoder when there is no Loop currently active, you activate
looping: the next Loop in the track will be activated.
4.4.2 Using Hotcues
In this
tutorial and in the previous one, we already used Hotcues to store Cue Points and
Loops. We want to show you here a few more details on their use.
The CUE/REMIX SLOTS buttons with various assignments.
As already
explained, when pressing an unlit CUE/REMIX SLOTS button when there is no Loop
active, you store a Cue Point at the current playback position (the button turns blue). In case
there is a Loop active, you store this Loop (the button turns green).
On the waveform of the software Deck, you can see that a line with the same color appears in
the track at the corresponding position. Moreover, a little number at the top reminds you which
button you should use to jump to that Cue Point or Loop:
A waveform with a Cue Point stored as Hotcue 2 and a Loop stored as Hotcue 3.
If you
make a mistake, or just decide you no longer want a particular Hotcue, you can quickly
clear it:
Tutorials
Looping and Cueing
Traktor Kontrol S2 - Manual - 45

Native Instruments TRAKTOR KONTROL S2 Specifications

General

Brand	Native Instruments
Model	TRAKTOR KONTROL S2
Category	DJ Equipment
Language	English