Apex Classic Setup and Programming Guide v2.2 Page 5
SETUP OVERVIEW
The AquaController Apex can be setup using either the Apex Display Module or
the Apex Web Interface or a combination of both methods. This manual provides
you with instructions to perform setup functions from both the display and Web
Interface. The manual will point out the few setup and maintenance functions
that can only be performed from the Display Module. If network connectivity
features are to be used (web based monitoring, web based control, email alerts,
etc) it is recommended to spend the time setting up the network interface right
away to allow the flexibility to program from the Web Interface.
Basic steps to a successful installation:
1. Physical Installation
2. Network Setup (optional)
3. Email Setup (optional)
4. Configuring the Apex to be Accessible from the Internet (optional)
5. Clock Setup
6. Apex Module Setup
7. Legacy Module Setup (optional)
8. Probe Setup
9. Programming Outlets
10. Display Setup
11. Sound Setup
12. Using the AquaController Apex
Setup through the AquaController Display Module is performed using the arrow,
contextual and select keys to navigate menus and scroll through selections.
Setup through this method does not require a functioning network interface or
networked computer with a browser and is a great option when having network
problems or trying to setup the network interface for the first time. All setup and
maintenance functions can be performed through the Display Module.
Setup through AquaController Apex Web Interface is very convenient. The
information is presented on the much larger computer web browser screen so
more information can be viewed at once. Programming changes and settings are
typed through the keyboard and selected with mouse clicks as opposed to
scrolling through screens. There are a few settings and much of the maintenance
functions that cannot be performed through the web interface and must be
performed through the Apex Display.
To Next Page
Loading...
Need help?
General