NETGEAR M4350 Series User Manual

Table 4. LEDs of model M4350-48G4XF (Continued)
DescriptionLED
Port LEDs, Front Panel
Left LED, speed, activity, and link status:
Off: No link is established on the port.
Solid green: The port established a 1G link.
Blinking green: The port is transmitting or receiving packets at 1G.
Solid yellow: The port established a 100M link.
Blinking yellow: The port is transmitting or receiving packets at 100M.
Port LEDs for PoE+ Gigabit
Ethernet ports numbered 1
through 48
Right LED, PoE status:
Off: No PoE-powered device (PD) is connected to the port.
Solid blue: A PD is connected and the port is supplying power successfully.
Solid yellow: Indicates one of the following failures, which prevents the port
from supplying power:
•
A short circuit occurred on the PoE power circuit.
•
The PoE power demand exceeds the available power.
•
The PoE current exceeds the PD’s classification.
•
An out-of-proper-voltage band condition occurred.
Off: No SFP module link is established on the fiber port.
Solid green: The fiber port established a 10G link.
Blinking green: The fiber port is transmitting or receiving packets at 10G.
Solid yellow: The fiber port established a 1G link.
Blinking yellow: The fiber port is transmitting or receiving packets at 1G.
Port LEDs for SFP+ ports
numbered 49 through 52
Port LEDs, Back Panel
Left LED, speed status:
Solid green: The port established a 1G link.
Solid yellow: The port established a 100M link.
Off: No link is established on the port.
OOB Ethernet port LEDs
Right LED, activity and link status:
Solid green: The port established a link.
Blinking green: The port is transmitting or receiving packets.
Off: No link is established on the port.
Model M4350-24X4V (SKU XSM4328CV)
This section describes the switch hardware features for model M4350-24X4V (SKU
XSM4328CV).
Hardware Installation Guide25Hardware Overview
Fully Managed Switches M4350 Series

NETGEAR M4350 Series Specifications

General

Brand	NETGEAR
Model	M4350 Series
Category	Switch
Language	English