NETGEAR M4350 Series User Manual

•
Direct attach cables:
-
AXC761: SFP+ 1 m (about 3.3 ft) direct attach cable
-
AXC763: SFP+ 3 m (about 10 ft) direct attach cable
For more information about NETGEAR SFP and SFP+ transceiver modules and cables,
visit netgear.com/business/wired/switches/accessories. If purchased, transceiver modules
and cables are shipped separately from the switch.
The following table shows the models and the ports that can support fiber transceiver
modules. SFP+ and SFP28 ports are backward compatible with SFP modules.
Table 8. SFP+ and SFP28 ports
Port NumbersType of PortModel Number
9 through 16SFP+M4350-8X8F
13 through 24SFP+M4350-12X12F
25 through 28SFP+M4350-24G4XF
49 through 52SFP+M4350-48G4XF
25 through 28SFP28M4350-24X4V
1 through 24SFP+M4350-24F4V
25 through 28SFP28
49 through 52SFP28M4350-44M4X4V
Dual-function Reset button
The switch provides a recessed, dual-function Reset button on the front panel.
Depending on how long you press the button (for details, see the following procedure),
this button lets you perform the following tasks:
•
Restart (power-cycle) the switch: The switch restarts. All saved settings are retained.
We recommend that you save the settings before you press the Reset button to
restart the switch.
•
Reset the switch to factory default settings: All settings are erased and the switch
restarts with factory default settings.
Hardware Installation Guide38Hardware Overview
Fully Managed Switches M4350 Series

NETGEAR M4350 Series Specifications

General

Brand	NETGEAR
Model	M4350 Series
Category	Switch
Language	English