English – 1
CONTENTS
GENERAL WARNINGS:
SAFETY - INSTALLATION - USE 3
1 - PRODUCT DESCRIPTION AND INTENDED USE 5
2 - OPERATING LIMITS 5
3 - INSTALLATION
3.1 - Gearmotor installation 6
3.2 - Assembling the guide provided 7
3.3 - Assembling the SNA30 and SNA30C guide 8
3.4 - Fastening the gearmotor to the guide 9
3.5 - Fastening the gearmotor to the ceiling 9
4 - ELECTRICAL CONNECTIONS
4.1 - Types of electrical cables 11
4.2 - Electrical cable connections 12
5 -
STARTING THE AUTOMATION AND CHECKING THE CONNECTIONS
5.1 - Connecting the automation to the mains electricity 13
6 - TESTING AND COMMISSIONING
6.1 - Testing 13
6.2 - Commissioning 14
7 - PROGRAMMING
7.1 - Programming keys 15
7.2 - QUICK SET-UP 15
7.3 - Acquisition of the opening and closing positions 15
7.4 - Checking the door movement 16
7.5 - Integrated radio receiver 16
7.6 - Programming the functions 16
7.6.1 - Level 1 functions (ON-OFF) 16
7.6.2 - Programming the Level 1 functions 17
7.6.3 - Level 2 functions (adjustable parameters) 18
7.6.4 - Programming the Level 2 functions 18
7.7 - Transmitter memorisation 19
7.7.1 - Mode 1 transmitter memorisation 19
7.7.2 - Mode 1 memorisation procedure 19
7.7.3 - Mode 2 transmitter memorisation 19
7.7.4 - Mode 2 memorisation procedure 20
7.8 -
Transmitter memorisation near the control unit
20
7.9 - Deleting all memorised transmitters from the memory 20
7.10 - Locking / unlocking of the radio memory 20
8 - FURTHER DETAILS
8.1 - Adding or removing devices 21
8.2 - Electric lock 22
8.3 - Connecting external devices 22
8.4 - Full deletion of the memory 22
8.5 - Special functions 22
8.6 - Accessories 22
8.7 - Connecting the Oview programmer 22
9 - DIAGNOSTICS
9.1 - Warning light signals and courtesy light 23
9.2 - Signals of LEDs on the control unit 23
10 - TROUBLESHOOTING 25
11 - PRODUCT DISPOSAL 25
12 - MAINTENANCE 26
13 - TECHNICAL SPECIFICATIONS 26
EC DECLARATION OF CONFORMITY 28
USER GUIDE (to be delivered to the end user) 29
To Next Page
Loading...
Need help?
General
