Nice Spin10KCE User Manual

28 – English
EC Declaration of Conformity (No. 194/SPIN)
and declaration of incorporation of “partly completed machinery”
Note - The contents of this declaration correspond to that stated in the ofcial document led in the ofces of Nice S.p.A. and, in particular,
the latest version thereof available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A copy of the
original declaration can be requested from Nice S.p.A. (TV) Italy.
Revision: 8 Language: EN
Manufacturer’s name: NICE S.p.A.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV), Italy
Subject authorised to draw up the
technical documentation:
NICE S.p.A.
Product type: Electromechanical gearmotor with incorporated control unit and radio receiver
Model / Type: SN6011
Accessories: ELDC, EPMA
The undersigned, Roberto Griffa, as Chief Executive Ofcer, hereby declares under his own responsibility that the product identied above
complies with the provisions of the following directives:
Directive 2014/53/EU (RED) - Health and safety (Art. 3(1)(a)): EN 62479:2010
- Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
- Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V2.2.0:2017, EN 301 489-3 V2.1.1:2017
- Radio spectrum (Art. 3(2)): EN 300 220-2 V3.1.1:2017
In addition, the product conforms to the following directive in accordance with the provisions applicable to “partly-completed machinery”
(Annex II, Part 1, Section B):
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 regarding machinery and amending
Directive 95/16/EC (recast).
- It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII, Part B, of Directive
2006/42/EC and that the following essential requirements have been applied and fullled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2-
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the “part-
ly-completed machinery”, without prejudice to the intellectual property rights of the manufacturer of the “partly-completed machinery”.
- If the “partly-completed machinery” is commissioned in a European country with an ofcial language other than the language used in this
declaration, the importer must include a translation to accompany this declaration.
- The “partly-completed machinery” must not be commissioned until the nal machine in which it is to be incorporated is declared to conform
to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012+A11:2014
EN 62233:2008
EN 60335-2-103:2015
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
Place and Date: Oderzo, 12 July 2017
Mr Roberto Griffa (Chief Executive Ofcer)

Nice Spin10KCE Specifications

General

Brand	Nice
Model	Spin10KCE
Category	Garage Door Opener
Language	English