registers missed and received calls only if the network
supports these functions, the device is switched on, and
within the network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open
a register, scroll to the event, and press C.
Call duration
Press , and select Tools > Log.
To monitor the approximate duration of your incoming
and outgoing calls, select Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code.
Packet data
Press , and select Tools > Log.
To check the amount of data sent and received during
packet data connections, select Packet data. For
example, you may be charged for your packet data
connections by the amount of data sent and received.
Monitor all communication events
Press , and select Tools > Log > Recent calls.
Icons in the log are as follows:
Incoming
Outgoing
Missed communication events
To open the general log where you can monitor all voice
calls, text messages, or data and WLAN connections
registered by the device, scroll right. Subevents, such as
a text message sent in more than one part and packet
data connections, are logged as one communication
event. Connections to your mailbox, multimedia
messaging centre, or web pages are shown as packet data
connections.
To add an unknown phone number from the log to your
contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select
Options > Clear log. Select Yes to confirm. To remove a
single event from one of the recent calls logs, press C.
© 2008 Nokia. All rights reserved. 129