contact to a certain number or address. The default
number is also used in voice dialling.
1. In the contacts list, select a contact.
2. Select Options > Defaults.
3. Select a default to which you want to add a number or
an address, and select Assign.
4. Select a number or an address you want to set as a
default.
The default number or address is underlined in the
contact card.
Add ringing tones for contacts
Press , and select Contacts.
To define a ringing tone for a contact or a contact group,
do the following:
1. Press the scroll key to open a contact card or go to the
groups list, and select a contact group.
2. Select Options > Ringing tone. A list of ringing tones
opens.
3. Select the ringing tone you want to use for the
individual contact or the members of the selected
group.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognises
it).
To remove the ringing tone, select Default tone from the
list of ringing tones.
Copy contacts
When you open Contacts for the first time, you can
choose to copy SIM contacts to the device memory or to
view SIM contacts in the contacts directory. The device
asks you if you want to copy names and numbers from a
SIM card to your device.
To start copying, press OK.
Press Cancel if you do not want to copy the SIM contacts
to the device memory. The device asks you if you want to
view the SIM contacts in the contacts directory. Press
OK, Contacts opens and you can see names stored on your
SIM card marked with
.
SIM directory and other SIM
services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
© 2008 Nokia. All rights reserved.132
To Next Page
Loading...
Need help?
General
Weight and Dimensions
