Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will he
lp you protect your warranty
coverage.
●
Keep the device dry. Precip
itation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circui
ts. If your device does get
wet, remove the battery, and allow the device to dry
completely before replacing it.
● Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
● Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or
melt certain plastics.
● Do not store the device in cold areas. When the device
returns to its normal temp
erature, moisture can form
inside the device and damage electronic circuit boards.
●
Do not attempt to open the device other than as
instructed in this guide.
● Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
● Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
●
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
● Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
● Use only the supplied or an approved replacement
antenna. Unauthorized ante
nnas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
●
Use chargers indoors.
●
Always create a backup of
data you want to keep, such
as contacts and calendar notes.
● To reset the device from time to time for optimum
performance, power off th
e device and remove the
battery.
© 2008 Nokia. All rights reserved.
168
To Next Page
Loading...
Need help?
General
Weight and Dimensions
