Quick start guide to O
2
X4
Just a second
We know you’re bursting to start using your new mobile,
but we just wanted to take the time to say thanks for
buying it and to point out that in this quick start guide is
all you need to know to get straight into it. Don’t miss
the fuller details in the other chapters that you should
take the time to read when you get a chance.
That’s it. You can start now.
Here are some quick instructions on how to get started. If
you want more detail, please refer to the detailed sections
of the guide:
Setting up
•Insert the SIM into the slot on the back of the O
2
X4
handset, connect the battery to the O
2
X4 and insert the
memory card into the slot at the bottom of the phone
• Check these items are securely in place, then open the
flip and hold and press until the screen turns on.
Then enter a PIN if necessary*
•You’re now ready to use the O
2
X4
Charging the handset
•Insert the lead from the charger to the base of the
handset into the charging socket
• Connect the charger to the correct electrical socket. The
phone will start charging
•When the phone is fully charged disconnect the charger
from the socket and then from the phone
* The default PIN code is 0000 for Pay Monthly customers and 5555 for Pay &
Go customers. If you enter an incorrect PIN code three times in succession, your
SIM card will lock and you must enter the PUK code to unlock it. Please contact
O2 Customer Service in this event.
Quick start guide
iii
To Next Page
Loading...
Need help?
General
