B930n User’s Guide> 41
5. Select Transparency as the Media Type from the Media type
pulldown.
6. Click OK.
E
NVELOPES
Envelopes can be printed using Tray 5. Read the following guidelines
before printing envelopes.
• Use envelopes specifically made for laser printers.
• Make sure that envelopes are stored in a cool dry place and
in their original packaging, if possible. Heat and humidity can
cause the envelopes to seal before or during printing.
• Do not use padded envelopes
• Remove excess air from enveloped before loading into the
feeder.
• Print only on the front of the envelopes.
• Load a maximum stack height of 10mm (.4 in)
• Avoid printing over the area where the envelope seams meet.
• When using commercial flap envelopes with side seams (vs.
diagonal seams) verify that the side seams are cut all the
way to the corner of the envelope.
• Never use envelopes with windows or metal clasps; they can
damage the printer.
Loading and Printing in Tray 5
1. Insert the envelopes in the tray with the following
considerations:
• Place C4 envelopes short-edge feed in the tray.
• Place Monarch, #10, C5, and DL envelopes long-edge feed
in the tray.
• Place the side to be printed facedown.
To Next Page
Loading...
Need help?
General
