B930n User’s Guide> 42
• Place the envelope with the Flap entering the printer first.
2. Adjust the paper guides to the size of the envelopes.
3. Change media type at Operator Panel via the Paper Menu’s
Media Type selection.
4. Select Envelope as the Media Type in the Media Type
pulldown.
5. Click OK.
P
OSTCARDS
Postcards can printed using Tray 5. Read the following guidelines
before printing Postcards.
• Make sure that postcards are stored in a cool dry place and in
their original packaging, if possible. Heat and humidity can
cause the postcards to curl.
• Load a maximum stack height of 10mm (.4 in). No higher
than fill line.
Loading and Printing in Tray 5
1. Insert the postcards in the tray with the following
considerations:
• Insert postcards long-edge feed and facedown. Place the
top of the postcard to enter the printer first (left side of the
printer)
Short-edge Feed Long-edge Feed
To Next Page
Loading...
Need help?
General
