B930n User’s Guide> 57
1. Select Standard Nup from the Finishing Mode pulldown in
the Setup Tab of your Printer Properties.
2. Click Options.
The Standard Nup window appears.
3. Enter the desired parameters.
Select the desired number of pages per sheet. Check the box
if a page border is desired. Select the page layout option and
enter a bind margin. If you wish to scale the pages to a full
page size, check Fit to page. Enter the units used to calculate
the bind margin, if applicable.
4. Click OK.
B
OOKLETS
With two-sided printing, you can print a document in the form of a
small book. You can use any paper size that duplex printing
supports. The printer automatically reduces pages to fit within the
booklet parameters. It prints two pages per side and prints the
pages in the order needed to accommodate a center fold. You can
specify the binding width to leave enough room in the center to bind
or staple your booklet. The Finisher option can not be used to staple
booklets.
Enable this feature is using your Printer Properties.
To print a booklet:
1. Select Booklet from the Finishing Mode pulldown in the
Setup Tab of your Printer Properties.
2. Click Options.
The Booklet window appears.
3. Enter the desired parameters.
To Next Page
Loading...
Need help?
General
