Printing
- 170 -
5
Press the scroll button ▼ several times to select [Calibration], and press «OK».
6
Press â–¼ several times to select [Cyan Tuning], [Magenta Tuning], [Yellow Tuning] or [Black
Tuning], and press «OK».
7
Press ▼ to select [Highlight], [Dark] or [Mid-Tone], and press «OK».
8
Press ▲ or ▼ to select the value (-3 to +3), and press «OK».
9
Press «ON LINE» to return to the standby screen.
10
Printing starts.
Repeat until you get the desired color.
Changing mono print mode
You can adjust the print mode of mono pages. The available values are as follows.
Controls the print mode with a good balance. Please select "Auto" generally.
[Color Mode] Suitable for printing a large amount of color pages.
Always print by using 4 color image drums without switching between color pages and
[Normal Mode] Suitable for printing a large amount of mono pages.
Color pages are printed by using 4 color image drums, and mono pages are printed by using the
black image drum only. If color pages and mono pages are mixed, the printing time will be
ï‚Ÿ The admin password is required to enter the [Admin Setup] menu.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press the scroll button â–¼ on the operator panel several times to select [Admin Setup], and
press «OK».
3
Input the admin password using the numeric keypad, and press «OK».
4
Press ▼ several times to select [Print Setup], and press «OK».
5
Press ▼ to select [Mono-Print Mode], and press «OK».
6
Select the print mode, and press «OK».
7
Press «ON LINE» to return to the standby screen.
Adjustment with utilities
You can tune the color using utility software. Please refer to the instructions on the specific utility for details.
Color Correct Utility(P.259)
Color Swatch Utility(P.257)
To Next Page
Loading...
Need help?
General
