Oki N36800B User Manual

Basic operations
- 74 -
 Depending on the installation environment of the machine, printing on paper that contains moisture may cause white
steam or water droplets to appear around the paper exit area of the machine. This is not abnormal because the heat
generated when the toner is fixed to the paper evaporates the moisture contained in the paper.
Inapplicable paper
Do not use the following types of paper. Doing so may cause paper jams or malfunction.
 Paper with smooth surface, rough paper, and paper with different front and back roughness
 Paper that is too thin or too thick
 Paper with much paper dust
 Short grain paper (Do not use for vertical feeding.)
 Wet (damp) paper
 Paper with curl, curve or wave due to humidity
 Paper stuck by static electricity
 Paper and envelopes that have been textured, embossed or coated
 Paper specially processed with glue, chemicals, etc.
 Paper specially processed without heat resistance (230°C)
 Paper with holes, perforations, notches, holes for binder
 Paper that has irregularities, crushing, burrs, etc. on the paper cut surface
 Non-square shaped paper, or paper whose cutting angle is not right
 Paper or envelopes with wrinkles, warping, corner bending, waving, creases, tears, etc.
 Paper with staples, clips, ribbons, tapes, clasps, etc.
 Special paper such as carbon paper, non-carbon paper, thermal paper, and pressure-sensitive paper
 Thermal transfer printer paper, ink jet paper, wet PPC paper, copying paper, Japanese paper, etc.
 Envelopes sticked with stamps
 Envelopes that are too thick
 Envelope made of plastic
 Double envelopes with inner bags
 Envelopes with clasps, buttons or windows
 Envelopes sticked with double-sided tape or with adhesive on the flap
 Envelopes with water repellency
Paper precautions by type
Plain
 The printing speed will be slowed when the paper size is set to [A6] or [A5] or when the paper width is set
to 182 mm or less.
 For thick paper, the toner may stick thinly to the whole paper or the printing may be light.
Partially printed paper
 When a printing frame is set, design it with careful considerations of the following variations in the printing
position.
Output position accuracy: ±2 mm; paper slant: ±1 mm/100 mm; image expansion and contraction: ±1
mm/100 mm (When GSM paper weight is 80 g/m
2
)
 This machine cannot print over a printed area.

Oki N36800B Specifications

General

Brand	Oki
Model	N36800B
Category	Printer
Language	English