Omron CP1E - INTRODUCTION User Manual

4-5 Inputting Programs
4
4
56 SYSMAC CP1L/CP1E Introduction Manual
Creating Programs
4-5-2 Inputting Contacts
Input a contact. For details on ladder programs, refer to 4-2-2 Ladder Program.
■Inputting Contacts
1. Press either the [L] or [C] key.
“LD 0.00” will be displayed.
2. Press the [Enter] key.
“Bit (1/1)” will be displayed and “0.00” will be displayed in reverse video.
3. Input address "4". Press the [Enter] key.
"4" is entered. The Comment dialog box will be displayed.
4. Input "Light detection sensor" as the I/O comment. Press the [Enter] key.
A contact representing input from the light detection sensor will be displayed on the
ladder program.
Next, input an OR circuit.

Omron CP1E - INTRODUCTION Specifications

General

Brand	Omron
Model	CP1E - INTRODUCTION
Category	Controller
Language	English