Omron CQM1H - PROGRAM User Manual

216
Coding Right-hand Instructions Section 5-6
Note The mnemonics of expansion instructions are followed by “(––)” as the func-
tion code to indicate that they must be assigned function codes by the user in
the instructions table before they can be used in programming. Refer to
page 18 for details.
The following diagram and corresponding mnemonic code illustrates the
points described above.
Address Instruction Data
00000 LD 00000
00001 AND 00001
00002 OR 00002
00003 DIFU(13) 21600
00004 LD 00100
00005 AND NOT 00200
00006 LD 01001
00007 AND NOT 01002
00008 AND NOT LR 6300
00009 OR LD −−
00010 AND 21600
00011 BCNT(67) −−
# 0001
004
HR 00
00012 LD 00005
00013 TIM 000
# 0150
00014 LD TIM 000
00015 MOV(21) −−
HR 00
LR 00
00016 LD HR 0015
00017 OUT NOT 00500
00100 00200
DIFU(13) 21600
00500
BCNT(67)
#0001
004
HR 00
MOV(21)
HR 00
LR 00
01001 01002 LR 6300
TIM 000
21600
00002
00005
HR 0015
00000 00001
TIM 000
#0150

Omron CQM1H - PROGRAM Specifications

General

Brand	Omron
Model	CQM1H - PROGRAM
Category	Controller
Language	English