163
Operation Level Section 5-3
5-3 Operation Level
Display this level to perform control operations on the E5@N. You can set
alarm values, monitor the manipulated variable, and perform other operations
in this level.
In the advanced function setting level, you can set a parameter to hide or
show the set points.
This level is displayed immediately after the power is turned ON.
To move to other levels, press the O Key or the O and M Keys.
Control in progress
Control stopped
Operation
Level
Initial Setting
Level
Control stops.
Communi-
cations
Setting
Level
Adjustment
Level
Power ON
Press the
O Key less than 1 s.
Press the O Key
for at least 1 s.
Press the O Key for at
least 1 s; display will flash.
Press the O Key for at least 3 s.
Press the
O Key for less than 1 s.
25
100
C
To Next Page
Loading...
Need help?
General
