Chapter 1: Introduction
1.3 Software Overview
Your LD-250 requires the licensed software described in this section. Software is factory-
installed on its LD-250 Core.
Access to software features is permitted by use of a USB license dongle that contains secure,
encrypted electronic copies of the operating licenses. Some licenses might have a restricted
term and expire after a specific date. You will receive several warning alerts before the license
expires.
LD-250 Software
The minimal operating configuration for an LD-250 consists of the AMR managed by a
human Operator using a Microsoft Windows PC and optionally from an Android or iOS tab-
let.
If you have more than one AMR, you must install and configure a Fleet Manager appliance
running the Fleet Operations Workspace software to manage multiple AMRs as a fleet. Fleet
management prevents job contention or collisions between AMRs and provides efficient pro-
cessing of all tasks that you assign to the AMR fleet.
See the following documents for detailed information:
l
EM2100 Installation Guide
l
Fleet Operations Workspace Core User's Guide
Figure 1-7 shows the devices that you might use to manage one or more AMRs and the soft-
ware components required for each device, if applicable.
20472-000 Rev B LD-250 Platform User's Guide 19
To Next Page
Loading...
Need help?
General
