Omron NX102 series User Manual

25
Related Manuals
NJ/NX-series CPU Unit Built-in EtherCAT Port User’s Manual (W505)
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2
Learning about the operat-
ing procedures and func-
tions of the Sysmac Studio.
Describes the operating procedures of the Sys-
mac Studio.
CNC Operator
Operation Manual
O032
SYSMAC
-RTNC0
 D
Learning an introduction of
the CNC Operator and how
to use it.
An introduction of the CNC Operator, installation
procedures, basic operations, connection oper-
ations, and operating procedures for main func-
tions are described.
NX-series
EtherCAT Coupler Unit
User’s Manual
W519 NX-ECC Learning how to use an
NX-series EtherCAT Cou-
pler Unit and EtherCAT
Slave Terminals.
The following items are described: the overall
system and configuration methods of an Ether-
CAT Slave Terminal (which consists of an NX-
series EtherCAT Coupler Unit and NX Units),
and information on hardware, setup, and func-
tions to set up, control, and monitor NX Units
through EtherCAT.
Manual name Cat. No. Model numbers Application Description

Omron NX102 series Specifications

General

Brand	Omron
Model	NX102 series
Category	Controller
Language	English