Omron USB3 Vision Series User Manual

No.17S010-01
56/68
STC-MBS43U3V / STC-MCS43U3V / STC-MBS163U3V / STC-MCS163U3V
Product Specifications and Use’s Guide
Setting Procedure
1. Select “UserSetX” (or Default) at “UserSetSelector”
2. Execute “UserSetLoad”
Setting Procedure
1. Set “UserSetX” or “Default” at “UserSetDefault”
Please follow the below procedure for the camera settings put back to the factory default settings.
Setting Procedure
1. Selects “Default” at “UserSetSelector”.
2. Executes “UserSetLoad”.
When UserSetLoad is executing,
the camera settings load from the selected
ROM that was selected at “UserSetSelector”
to the register at RAM.
When the camera power is on,
the camera settings load from the selected
ROM that was selected at “UserSetDefault”
to the register at RAM.
ROM
UserSetX
ROM
Default
Camera
Setting
UserSetSelector
Selector
ROM
UserSetX
ROM
Default
Camera
Setting
UserSetSelector
Selector
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com

Omron USB3 Vision Series Specifications

General

Brand	Omron
Model	USB3 Vision Series
Category	Digital Camera
Language	English