Mode Sense Command
August 2016 Commands 125
Fibre Channel Port Control Page
TABLE 3-79 Fibre Channel Port Control Page (19h)
Byte
Bit
76543210
0 PS SPF (0) Page Code (19h)
1 Page Length (06h)
2 Reserved
3 DTFD PLPB DDIS DLM DSA ALWI DTIPE DTOLI
4
thru
5
(MSB)
Reserved
(LSB)
6 Reserved RR_TOV units
7 Resource Recovery Time Out Value (RR_TOV)
Parameter Value
PS: Parameters Savable 0 = Not supported
SPF: SubPage Format 0 = Mode page format
DTFD: Disable Target Fabric Discovery 0 = Public Loop behavior supported
PLPB: Prevent Loop Port Bypass 0 = Not supported
DDIS: Disable Discovery 0 = Not supported
DLM: Disable Loop Master 0 = Not supported
DSA: Disable Soft Address 0 = Not supported
ALWI: Allow Login Without Loop Initialization 0 = Not supported
DTIPE: Disable Target Initiated Port Enable 0 = Not supported
DTOLI: Disable Target Originated Loop Initialization 0 = Not supported
RR_TOV units 101b = 10 second units
RR_TOV value 1Eh = 300 seconds
To Next Page
Loading...
Need help?
General