Security Protocol In Command
202 T10000: Interface Reference Manual August 2016
Security Protocol In Command
The Security Protocol In (SPIN) command returns information about security and
encryption
TABLE 3-152 Security Protocol In Command (SPIN)
Byte
Bit
76543210
0 Operation Code (A2h)
1 Security Protocol
2
thru
3
(MSB)
Security Protocol Specific
(LSB)
4 INC512
(0)
Reserved
5 Reserved
6
thru
9
(MSB)
Allocation Length
(LSB)
10 Reserved
11 Control Byte
Parameter Value
Security Protocol The Security Protocol field specifies which security protocol is being
requested.
• 00h = Security Protocol Information
• 20h = Tape Data Encryption
To Next Page
Loading...
Need help?
General