Oracle StorageTek T10000 Reference Manual

Mode Sense Command
128 T10000: Interface Reference Manual August 2016
Medium Partition Mode Page
Mode sense page 11h, see , returns information about the current tape partitions on
the mounted volume.
TABLE 3-82 Mode Sense Medium Partition mode page - T10000C and T10000D
Byte
Bit
76543210
0 PS (0) SPF (0) Page Code (11h)
1 Page Length
2 Maximum Additional Partitions
3 Additional Partitions Defined
4 FDP SDP
IDP PSM POFM CLEAR
ADDP
5 Medium Format Recognition
6 Reserved
Partition Units
7 Reserved
8
thru
9
Partition 0 Size
n-1
thru
n
Partition Size
Parameter Value
Page Length Additional bytes in this mode page
0Ah = Mode page with two partitions - T10000C
08h - 1Ah = determined by the number of partitions
defined - T10000D
Maximum Additional Partitions Maximum number of additional partitions supported
1 = Always one when tape loaded (T10000C)
9 = Always nine when tape loaded (T10000D)
Additional Partitions defined Number of additional partitions
0 = No additional partitions, tape has one default
partition
1 = One additional partition, tape has two partitions
(T10000C)
1-9 = Additional partitions (T10000D)
FDP: Fixed Data Partitions 0 = Always zero
SDP: Select Data Partitions 0 = Always zero
IDP: Initiator Defined Partitions Not used on mode sense command
0 = Tape not initiator partitioned
1 = Tape initiator partitioned

Oracle StorageTek T10000 Specifications

General

Brand	Oracle
Model	StorageTek T10000
Category	Storage
Language	English