Request Sense Command
192 T10000: Interface Reference Manual August 2016
TABLE 3-145 Progress Indication Sense Key Not Ready or No Sense Specific Data
Byte
Bit
76543210
0 SKSV Reserved
1
thru
2
(MSB)
Progress Indication
(LSB)
Parameter Value
SKSV:
Sense Key Specific Fields Valid
0 = Progress indication not valid
1 = Progress indication valid. Only set when sense key is 0.
Progress Indication Percent complete
0000h to FFFFh
FSC-1 Fault Symptom Code for the first error encountered while
attempting the requested operation.
The FSC codes are specific to the T10000 tape drives.
FSC-2 Fault Symptom Code for second error encountered.
FSC-3 Fault Symptom Code for last error encountered.
TapeType Identifies type of tape currently loaded in drive.
1000b = Cleaning tape
0100b = Dump tape
0010b = Code load tape
0001b = Data tape
0000b = Unknown type
DAvail Diagnostic information is Available
MIRBad Metadata on the currently loaded tape is defective
Volsafe Current tape is append only
TapeEOL Tape currently loaded is at End Of Life (EOL)
LibAtt Drive is Attached to a library
To Next Page
Loading...
Need help?
General