Oracle StorageTek T10000 Reference Manual

SCSI Verify Command (16 Byte)
268 T10000: Interface Reference Manual August 2016
SCSI Verify Command (16 Byte)
The SCSI Verify command is a vendor unique command used to perform StorageTek
T10000 Media Validation using the Fibre Channel Interface of the StorageTek T10000C
and T10000D tape drives.
The tape drive will respond with status immediately. This allows the application to
issue Request Sense commands to monitor progress of the media validation. Most
other commands will return busy status while the media validation is running..
TABLE B-1 CDB for SCSI Verify Command
Byte
Bit
76543210
0 Operation Code (8Fh)
1 Reserved VTE VLBPM VBF IMMED BYTCMP Fixed
2 SSP STOP RBMIR MedStat LAST NonDIV
3 Partition
4
thru
11
(MSB)
Logical Object Identifier
(LSB)
12
thru
14
(MSB)
Verification Length
(LSB)
15 MedVal Reserved Control
Parameter Value/Description
Operation Code 8Fh
VTE 1b Verify to EOD on last partition
VLBPM 0b
VBF 0b
IMMED 1b Status returned when command starts
BYTCMP 0b
Fixed 0b
SSP 0b Do not start from specified position
1b Start from Specified Position
STOP 0b Perform Media Validation
1b Stop Media Validation
RBMIR 1b Rebuild MIR starting at MIR invalid point
MedStat 0b VolStat verify
1b MediaStat verify

Oracle StorageTek T10000 Specifications

General

Brand	Oracle
Model	StorageTek T10000
Category	Storage
Language	English