Report Supported Operation Codes Command
180 T10000: Interface Reference Manual August 2016
One_Command Parameter Data Format
The Report Supported Operation Codes One_Command Parameter Data Format
contains information and a usage map for bits in the CDB for the command and
service action field.
TABLE 3-134 One_Command Parameter Data
Byte
Bit
76543210
0 Reserved
1 CTDP Reserved Support
2
thru
3
(MSB)
CDB Size (n-3)
(LSB)
4
thru
n
(MSB)
CDB Usage Data
(LSB)
n+1
thru
n+12
(MSB) Command Timeouts Descriptor
(see TABLE 3-135 on page 182)
(LSB)
Parameter Value
CTDP: Command Timeouts
Descriptor Present
Command Timeouts Descriptor Present
0 = Indicates the command timeouts descriptor is not included in the
parameter data
1 = Indicates the command timeouts descriptor is included in the
parameter data (see TABLE 3-135 on page 182)
Support 000b Data about the requested SCSI command is not
currently available. All data after byte 1 is not valid. A
subsequent request for command support data may be
successful.
001b The device server does not support the requested
command. All data after byte 1 is undefined.
010b Reserved
011b The device server supports the requested command in
conformance with a SCSI standard. The parameter data
format conforms to the definition in TABLE 3-134.
100b Reserved
101b The device server supports the requested command in
a vendor specific manner. The parameter data format
conforms to the definition in TABLE 3-134.
110b to 111b Reserved
To Next Page
Loading...
Need help?
General