Log Sense Command
84 T10000: Interface Reference Manual August 2016
• Parameters 0400 - 0402, and 0407 will not be reset by a Log Select command.
The T10000D Vendor Unique Drive Statistics page (3Dh) reports a variety of vendor
unique drive statistics.
TABLE 3-43 T10000D Vendor Drive Statistics Page Codes
Parameter
Code Description
Length
(Bytes)
Default
Threshold
0100h Read Forward Data Checks - Temporary 4 all FF's
0101h Write Data Checks - Temporary 4 all FF's
0102h Read Data Checks Without Hardware Indicators -
Temporary
4 all FF's
0103h Write Data Checks Without Hardware Indicators -
Temporary
4 all FF's
0104h Read Recovery Retry Count 4 all FF's
0105h Read Transient Conditions 4 all FF's
0106h Write Transient Conditions 4 all FF's
0107h Servo Temporaries 4 all FF's
0108h Servo Transient Conditions 4 all FF's
0109h 2T Corrections (2TE) 4 all FF's
010Ah Matrices with Progressive Write 1 or 2 (MPWD) 4 all FF's
010Bh Matrices with Progressive Writes (MPWS) 4 all FF's
010Ch Progressive Write for Indicated Channels (PWC) 4 all FF's
010Dh Progressive Write for Data; Mode 1 (PW1) 4 all FF's
010Eh Progressive Write for Data; Mode 2 (PW2) 4 all FF's
0110h PW SOT (Leading Head) (PWSOT) 4 all FF's
0111h SOT Trailing Head (SOTT) 4 all FF's
0112h Write Recovery Retry Count 4 all FF's
0114h PWC Matrix Count 4 all FF's
0115h SOT Leading Head (SOTL) 4 all FF's
0116h Matrix Count 4 all FF's
0117h PW2 Matrix Count 4 all FF's
0118h Maximum Append PWS COunt 4 all FF's
0120h Maximum PWD Written Stripe Count 4 all FF's
0121h PWD Matrix Count 4 all FF's
0122h PWD Written Stripe Count 4 all FF's
0200h Read Data Request Timeouts 4 all FF's
0201h Write Data Request Timeouts 4 all FF's
To Next Page
Loading...
Need help?
General