Request Sense Command
190 T10000: Interface Reference Manual August 2016
Sense Data:
TABLE 3-143 Sense Data Format
Byte
Bit
76543210
0 Valid Response Code (70h or 71h)
1 Reserved
2 Filemark EOM ILI RSVD Sense Key
3
thru
6
(MSB)
Information
(LSB)
7 Additional Sense Length (n-7)
8
thru
11
(MSB)
Command Specific Information
(LSB)
12 Additional Sense Code
13 Additional Sense
14 Field Replaceable Unit Code
15 SKSV (MSB)
16 Sense Key Specific
17 (LSB)
18
thru
23
(MSB)
Fault Symptom Codes 1-3
(LSB)
24 Tape Type
Davail MIRBad Volsafe TapeEOL
25 Reserved
LibAtt RSVD
Parameter Value
Valid 0 = Information field does not contain valid data
1 = Information field contains valid data
Response Code 70h = Current error, sense data is for the command that
received the check condition.
71h = Deferred error, sense data is for a previously issued
command. The current command that received check
condition was not executed.
Filemark 0 = Normal
1=ARead or Space command encountered a filemark
To Next Page
Loading...
Need help?
General