Oracle StorageTek T10000 Reference Manual

Read Position Command
164 T10000: Interface Reference Manual August 2016
Length Tape length
2h = Standard cartridge
4h = Sport cartridge
Section Layout Number of sections
01 = One section
Cartridge Type 10h = Data tape
20h = Code load tape
40h = Dump tape
Last Tape Speed 1h = Lowest speed
2h = Next lowest speed
3h = Medium speed
4h = Next highest speed
5h = Highest speed
Next Tape Speed 1h = Lowest speed
2h = Next lowest speed
3h = Medium speed
4h = Next highest speed
5h = Highest speed
Partition Size Capacity in Gigabytes (GB)
Host Side ID Next block to be written or read from the drive buffer
Device Side ID Next block to be written or read from the tape
Matrix Count Number of matrices down the tape
Space Remaining Space remaining on the tape in 4K byte blocks
Servo Position Longitudinal position
Parameter
Value

Oracle StorageTek T10000 Specifications

General

Form Factor	5.25-inch half-height
Interface	SCSI Ultra320 LVD
Data Cartridge	T10000
MTBF	250, 000 hours
Type	Tape Drive
Data Transfer Rate (native)	240 MB/s
Native Data Rate	240 MB/s
Transfer Rate (compressed)	480 MB/s