EasyManuals Logo
Home>Pantum>All in One Printer>M9106 Series

Pantum M9106 Series User Manual

Pantum M9106 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
137
Error Message
Error Message
Cause
Measure
No cartridge detected
The laser toner cartridge is
installed incorrectly or laser
toner cartridge is damaged.
Install the cartridge correctly or replace it
with a new cartridge.
Toner Low (this prompt
is displayed together
with the standby picture
alternately.)
The toner in cartridge runs
low.
Please replace with a new toner
cartridge.
As the toner is low, it is
not available to accept
the printing job (this
prompt is displayed
together with the
standby picture
alternately.)
In case of insufficient toner
level in toner cartridge, the
print jobs cannot be
completed.
(Printing, copying and
scanning functions are
working normally)
Please replace with a new toner
cartridge.
Toner cartridge life
expired.
The toner in cartridge runs
out.
Please replace with a new toner
cartridge.
Printer paper jam
The print paper is loaded
incorrectly.
Please correctly load the print paper.
Scanner is Busy
With other scan jobs.
Please cancel the current scan job or
wait for the completion of other scan
jobs.
Scan failed
Scanner internal failure.
Please contact Pantum Customer
Service.
No paper in ADF
If you have selected ADF as
the scan source, this
message appears when you
start a copy or scan job
without loading paper in the
ADF.
Please put in the original properly.
Paper jam occurred on
ADF
This prompt appears when
there is a feed jam or feed
failure in copying or scanning
with the ADF.
Please remove the paper jam, arrange
well and put originals into the ADF for
scanning again.
Note:
If the problem persists, please contact the customer service center. See the Three Guarantees

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M9106 Series and is the answer not in the manual?

Pantum M9106 Series Specifications

General IconGeneral
BrandPantum
ModelM9106 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals