7 - 6
Controls
7.09.02 Operation-mode keys
There are two operation modes. The selected mode is indicated by the luminous diode of
the respective key.
SEWING mode
ENTER mode
7.09.03 Function keys
Arrow keys ( right / left )
- Change menu bars
- for positioning the cursor when entering several values in one line
Plus / Minus keys
- for increasing or decreasing input values
Esc key
- for interrupting functions without assuming the value entered
- for returning to superordinate menu functions
- for error acknowledgement following an error message
Clear key
- set the input value to 0
- for error acknowledgement following an error message
Enter key
- for confirming an input value
- for error acknowledgement following an error message
7.09.04 Number keys
Below the display there is a bar with number keys ( 1 - 0 ).
Depending on the current operating mode, these keys have the following functions:
- carrying out the function shown by the symbol displayed above the number key
- entering a numerical value
- selecting functions or the next menu level
Double click = press the key twice in rapid succession
Esc
Clear
Enter
To Next Page
Loading...
Need help?
General
