11 - 14
Programming
Fig. 11 - 19
Explanation of the symbols in the display:
Stitch length
This function opens a direct menu for inputting the desired values for the stitch length.
Bartack menu
This function opens a direct menu for inputting bartack functions.
Reverse sewing
When this function is activated the seam is sewn backwards in the current seam section.
Speed
This function opens a direct menu for inputting the value of the speed dependent on the
seam section.
Placed stitch
This function opens a direct menu for enabling/disabling the placed-stitch function and
inputting a value for the placed-stitch position.
● Press the pedal. The machine switches automatically to manual SEWING.
● Sew the seam manually.
● The end of the seam section can be determined after the first standstill of the machine.
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 20
● The corresponding functions at the end of the seam section can be entered using the
control panel ( see chapter 11.14 Seam section end ) or they can be selected directly
using the knee switch or pedal.
The symbol also appears on a dark background in the display when
the function is activated using the knee switch or pedal. If a function is
activated accidentally, it can be deactivated again using the corresponding
number key.
● After pressing the Enter key, the seam section end is accepted and you switch over
to the next seam section.
● Programming is finished with the program end function.
Enter
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
To Next Page
Loading...
Need help?
General
